烟气CO2捕集热能梯级利用节能工艺耦合优化

醇胺法捕集CO₂技术是一种较成熟的CO₂捕集技术，具有吸收速度快、脱除效果好等显著优点，但其操作费用高、解吸能耗大。本文以降低醇胺法捕集烟气中CO₂系统再生能耗为出发点，对常规醇胺法捕集CO₂工艺统进行了节能优化研究。在常规工艺流程基础上引入压缩式热泵节能技术，并利用Aspen Plus软件建立了基于压缩式热泵技术的CO₂捕集工艺流程模型。研究了压缩式热泵与机械蒸汽压缩回收（MVR）热泵、分流解吸、分布式换热、级间冷却4种节能工艺耦合，通过模拟计算与优化，结果说明了最佳节能工艺组合为“解吸塔压缩式热泵+贫液MVR热泵+分流解吸+级间冷却”耦合的CO₂捕集工艺流程，当解吸塔顶气体分流比为0.25∶0.75、冷富液分流比为0.05∶0.95、级间冷却器位于吸收塔17块塔板位置、吸收塔输入冷量为-3.0GJ/h时，系统再生能耗最低，为2.533 GJ/tCO₂，相比常规有机胺工艺（再生能耗4.204GJ/tCO₂）节能率39.748%。     

The microstructure of buccal cavity and alimentary canal of Siganus rivulatus: Scanning electron microscope study

The microstructure of the oral cavity and alimentary canal of herbivorous fish Siganus rivulatus collected from the Red Sea were investigated by using scanning electron microscope (SEM). The results showed that S. rivulatus has three types of teeth, tri‐cusped, bi‐cusped, and papilliform. A taste bud (Type I) was recorded in the oropharyngeal cavity. Characteristic styles of microridges on the cell's surface inside the buccal cavity were recorded. Also, the distribution of the mucous cells in the lining of the mouth cavity, alimentary canal was observed. Mucosal folds along the distinct parts of alimentary canal, showed characteristic pattern which was complex in the intestinal mucosa. The results concluded that there are characteristic microstructures according to feeding habitat compared with other bony fishes.     

环形通道内液态铅铋合金流动换热特性实验研究

通过对环形通道内液态铅铋合金的流动换热特性进行实验研究，得到了气泡泵注气对液态金属流动的影响，并拟合出环形通道内液态铅铋合金的摩擦系数关系式和换热特性关系式。结果表明：采用气泡泵注气能有效提升铅铋合金的质量流速；相同Reynolds数下环形通道内液态铅铋合金的摩擦系数大于由布拉休斯公式计算得到的摩擦系数；液态铅铋合金对流换热过程中，导热项占主导地位，并且Nusselt数随Peclet数的增大而增大。     

Ultralow-threshold wideband-tunable single-mode ultraviolet lasing from lanthanide-doped upconversion nanomaterials

Ultraviolet (UV) lasers with dynamic wavelength-tunability and high monochromaticity are crucial in a multitude of practical applications yet still remarkable challenges. Here, we show wide wavelength-tuning of single-mode UV lasing based on lanthanide-doped upconversion nanoparticles (UCNPs). The rationally designed Yb³⁺/Er³⁺/Tm³⁺/Gd³⁺/Ce³⁺ co-doped multilayer UCNPs, which exhibits a broad gain spectrum with the full width of half maximum of around 57 nm in the UV regime, are developed. More importantly, by taking advantages of a diffraction grating as the tuning component, stable single-mode emission can be achieved in the UCNPs-based external-cavity-extended Fabry–Pérot laser at room temperature. Specifically, the lasing threshold is around 137 µJ cm^–2, which is two orders of magnitude lower than that in the previously reported articles. Precise wavelength-tuning from 310 to 363 nm can be realized by adjusting the Littrow angle. This achievement highlights a portable alternative to continuously wideband-tunable UV lasers and opens up new opportunities for constructing compact solid-state UV photon sources.     

腔磁力系统中的诱导透明和快慢光传播

为了在腔磁力系统中实现可控的磁子诱导透明、磁力诱导透明以及快慢光传播,建立了一个混合腔磁力系统.该系统由一个含有YIG球的微波腔和在z方向对球施加一个均匀的偏置磁场组成,并用强泵浦场驱动磁子和弱探测场驱动微波腔.研究表明,通过调节腔与磁子之间的相互作用强度和微波腔与磁子的耗散比,可以增加磁子诱导透明(MIT)、磁力诱导透明(MMIT)的效果和提高快慢光传播的速度.该研究结果可为磁力诱导放大、量子光学操纵和量子信息存储以及灵敏光开关的研究提供参考.     

基于跨临界CO2热泵的茶叶生产能源系统负荷削减潜力

乡村产业中的化石能源设备逐渐被电能技术替代，引起了乡村负荷波动增大、部分时段产生集中高负荷的问题。为了解决以上问题，将低品位清洁能源应用至乡村的茶叶生产中，针对烘茶全过程的工艺要求提出了跨临界CO₂热泵烘茶技术；并以某茶叶生产乡村为对象，对其代表台区的全年日用电量及产茶日负荷进行了分析，得出采用CO₂热泵烘茶后其负荷得到大幅度削减，整体可降低至原负荷的39.6%~46.8%，峰值负荷与平时负荷的比值由原本的13.6降至5.4~6.2。跨临界CO₂热泵应用至农产品生产中可有效缓解乡村供电压力。     

A novel adaptive convolutional neural network for fault diagnosis of hydraulic piston pump with acoustic images

As an essential part of hydraulic transmission systems, hydraulic piston pumps have a significant role in many state-of-the-art industries. Thus, it is important to implement accurate and effective fault diagnosis of hydraulic piston pumps. Owing to the heavy reliance of shallow machine learning models on the expertise and experience of engineers, fault diagnosis based on deep models has attracted significant attention from academia and industry. To construct a deep model with good performance, it is necessary and challenging to tune the hyperparameters (HPs). Since many existing methods focus on manual tuning and use common search algorithms, it is meaningful to explore more intelligent algorithms that can automatically optimize the HPs. In this paper, Bayesian optimization (BO) is employed for adaptive HP learning, and an improved convolutional neural network (CNN) is established for fault feature extraction and classification in a hydraulic piston pump. First, acoustic signals are transformed into time–frequency distributions by a continuous wavelet transform. Second, a preliminary CNN model is built by setting initial HPs. The range of each HP to be optimized is identified. Third, BO is employed to select the optimal combination of HPs. An improved model called CNN-BO is constructed. Finally, the diagnostic efficiency of CNN-BO is analyzed using a confusion matrix and t-distributed stochastic neighbor embedding. The classification performance of different models is compared. It is found that CNN-BO has a higher accuracy and better robustness in fault diagnosis for a hydraulic piston pump. This research will provide a basis for ensuring the reliability and safety of the hydraulic pump.     

A novel profile with high efficiency for hydrogen-circulating Roots pumps used in FCVs

Low flow rate is one of the primary disadvantages of Roots pumps when they are applied in hydrogen fuel cell vehicles. A novel profile for Roots pumps was developed in this paper to increase the working volume and reduce the internal leakage. The available range of the design parameters of the Roots pump with the new profile was determined analytically, and an improvement in the working volume was validated. The flow dynamics inside the traditional and new pumps were investigated by experiments and numerical simulations. The analytical results indicated that the maximum area utilization of the new profile was approximately 10.4% higher than that of the traditional profile at the same lobe number. The numerical results demonstrated the superiority of the proposed profile in high flow rate and sealing. The tip concentric arcs of the new profile reduced the internal leakage via the radial gap. The characteristic of multipoint meshing within a certain range of rotational angles reduced the interlobe leakage.     

A system for time-fluctuating flow rate measurements in a single-blade pump circuit

Commonly used flow rate measurement systems provide an accurate and stable output value of the quasi-stationary flow rate. In some pump types as e.g. single-blade pumps significant flow rate fluctuations may occur even in steady operation points due to rotor-stator interaction. For the analysis of the time-resolved flow rate a new measurement and evaluation method is presented based on an electromagnetic flow meter. Internal averaging of the flow meter is deactivated and the raw signal is evaluated directly with a sampling rate of 3 kHz. With ensemble-averaging in combination with an impeller position detection, interfering signals acting on the time-resolved measurement signal are filtered out. Accompanying numerical simulations of the pump flow circuit are carried out with a 1D method of characteristics and validated against well-established time-resolved pressure measurements of the pump flow. Experiment and simulation show a resembling trend of pressure as well as flow rate fluctuations over the entire operation range of the pump. Thus, by the combined utilisation of measurement and simulation technique, we assure the validity of the ensemble-averaged flow rate fluctuation results. We find that the flow rate fluctuations show a consistent phase shift to the pressure fluctuations that increases towards overload. The flow rate amplitude is an order of magnitude smaller than the amplitude of the pressure fluctuations.     

地埋管换热器分区运行对土壤热堆积特性影响的研究

为了缓解埋管区域土壤的热量堆积问题,提出了埋管换热器按内中外、块状、间隔三种分区运行的策略,利用CFD软件建立了10×10的井群换热模型,对地源热泵系统在三种分区与不分区运行策略下运行十年进行数值模拟,分析不同分区运行策略对土壤温度分布和土壤热堆积特性的影响。模拟结果可知:不分区、内中外分区、块状分区、间隔分区四种运行策略下埋管区域的平均温度分别为25.23、23.31、23.06、23.28℃,最高温度分别为40.62、32.77、40.65、38.93℃;分区运行较不分区运行可以有效缓解热堆积作用,埋管区域整体温度较不分区运行时降低了2.00℃左右,内中外分区策略可以显著缓解埋管区域热堆积。